The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Volvo 760 to 740 conversion - no fuel from injectors 700

Need some help to get over this last hurdle

The project was to swap a 740 230 engine for the B28, changed harnesses in engine bay and under dash. Note that underdash harness was not from donor car but another 740 (86). New distributor, Ign module.

Ignition has good spark but there is no gas on cranking. With the key in on position so fuel pump runs I can energize the injectors individually, reconnect injector plugs and start the engine. Runs until that shot of fuel is gone.

The problem is no fuel from the injectors with the engine cranking.

I have 12 volts on the harness to the injectors, Good connection to to the eccm pin 13. Can't find the relay for the radio suppression so I have that socket jumpered, and still no start.

From other areas on the board it appears that a pulsed ground signal needs to be present. How can I test for that?

Any ideas would be welcome

Thanks
Richard






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.