The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Temp guage problem after engine swap 700 1987

posted by  Freaky_1 on  Fri Jul 19 09:14 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I just had a b230f from an 86 740 installed in my 87 740. The 86 engine harness was used. The ignition wire was retained from the 87, as the 86 wasn't usning the same location in the connector.

The temp guage wire isn't in the 86 harness where it is (was, they killed my harness) in the 87.

The temp guage starts out @ about half way when engine is started cold. After the least bit of temp, it maxes out (it's not hot). Also, turning on the lights or activating the turn signals causes the guage to pulse.

I'm already planning on rewiring the circuit as it was with the 87 harness, I just wonder if there's something else I should be looking at.

Thanx,
Frank
--
85 740 gl NA manual trans 87 740 gle NA zf trans 88 740 gle turbo wagon AW trans, loaded & fun.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.