The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Idles rough when cold 200 1984

84 245T factory intercooler...

Starting to idle rough/miss when firing up cold, smooths out when warm and runs well. Have not yet tried to isolate a weak cylinder, but the miss does not seem random. No miss at operating temperature.

Has a wiring harness rot problem; not the one you normally think of but the one which connects (8-pin gray connector) at the firewall on the passenger side and feeds things like the CIS and throttle position switch.

Recently changed out all injector seals to eliminate possibility of leakage; injector nozzles looked surprisingly clean; I did not check spray patterns.

Where should I point first? Clean up the electrical harness, test the f.i. nozzle spray or look for a mechanical (i.e. cylinder compression) problem?

Thanks in advance for troubleshoot opinons; suspect some have been in same place.

Robert
84 245 Ti
88 245 DL






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.