The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

gag gauge 200

It's really not very hard, at least for my car it wasn't. Open up the trunk and pull the carpet over from the side where the back of the seats are and you should see a metal plate screwed to the car. Unscrew it, this will give you access to the fuel sender unit, there will be hoses connected to it, If you take the hoses off it will be less difficult to pull out of the tank. I was able to get it off with hoses connected. If I recall correctly you should be able to pull it out of the tank by twisting it 90 degrees counter clockwise. you may have to use something to help persuade it to turn as they tend to be fairly tight. Pull it out and check the float, it will be obvious if any fuel has entered the float. I replaced my float with one from a junk yard. If you're real inventive (just remember you are dealing with GASOLINE!) you might be able to drain it and just patch up the hole.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.