The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Spiral spring in window mechanism - '88 745

When I took the right front door of our '88 745 GLE apart I found a spiral spring in bottom of the door.

I figured out that this spring attaches in the center of the quadrant-shaped gear that lifts the window.

The rub -
Is it possible to put this spring back in place without removing the lift assembly?
When viewed from the inside of the door, does the spring wind clockwise or counter-clockwise? In other words, how do I orient the spring when I try to insert it?

For example - "Hold the spring so it winds clockwise and the hook on the end at 3 o'clock when you put the spring in. Do this with the window up."

I can take the other door apart and look at the spring, but I do not want to waste my time, as I think that I could figure out the spring's position if I remove the lift assembly.

I have read the appropriate FAQs and done a search with no useful results.

Thanks for your time.
--
2 8s & 2 7s 600,000 miles total






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.