The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

'81 240 No-Start saga continues....however.... 200

Rick -

I just read over the following:

>>(Recall that the engine starts when starting fluid is squirted into the intake manifold and I'm pretty sure the injectors are firing. When cranking the car if will not even "hit" except on the starting fluid.)<<

The starting fluid gets to the cylinders through a passage normally used only by measured air. Starting on the fluid proves ignition, but not that the injectors are firing.

Bentley manual covers LH systems beginning in 1983.

Figure out a test to see that the injectors are firing. The system works, in a general way, by feeding fuel under pressure to the injectors all the time. They fire with a certain frequency, faster for more fuel. The ECU determines the frequency.

Do you have a HaynesManual? It will cover your model.

Your test of the cold start injector will help.

Good Luck,

Bob

:>)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.