The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

idles really rough then stalls, after cleaning throttle body, help 700 1990

Hey bricksters!
Need some help. I thought today I would do some PM work on my 90 740ti brick.
I flushed the throttle body with carb and choke cleaner. I was quite liberal with the spray. I did not remove the body but, I did excersise the butterfly a couple of times. I did remove Idle valve to inspect and it seemed OK? It was slightly opened. I tested for resistance and it was 8 ohms and thats ok. Then I checked for any codes and their was none. Did reset anyways.

The engine when started runs like at 1500rpm for a few minutes then goes to 800ish. But when I rev the engine a few times it drops below regular idle and then stalls. Runs great when just driving along.
Thanks for any help.
It ran fine before I attempted this work.
Yorkbrick
--
90 744ti, K&N, IPD lowering springs, M46, 110k, 35%tint,






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.