The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

M46 won't shift into 1st or 2nd without lifting 'reverse' ring 200

posted by  someone claiming to be bill on  Tue Sep 17 16:45 CST 2002 [RELATED]

Pop out the 4 plastic retainers that hold the shifter boot and pull it up. You will see the reverse lock gate, and the screws/slots to adjust it. Loosen the 2 screws and slide the gate a bit to the left. Engage 1st gear and adjust the gate for slight clearance from the lockout lug at the base of the shifter. Make sure 1st and 2nd work ok and the lock functions properly. Tighten screws and reassemble boot.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.