The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Lambda problem 200 1984

posted by  kerry on  Wed Sep 18 10:25 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 11 08:15 CST 2014
[RELATED]

Need some help with a 240T Lambda Sond problem...

I can't get the frequency to fluctuate when trying to set the mixture.
Should be somewhere around 45-55% duty cycle, but it's stuck at a steady
70%. Tried a different computer with no luck, and am at wits end. No
clue where to go from here.

Per Bentleys, readings were taken at the Red wire near the battery. Per Volvo green manual, getting a buzz from the frequency valve, O2 sensor wire is not grounding out with shielding. Volvo manual says the computer is the problem, but a known good box gave no difference. Frequency still stays at 70+%. O2 sensor is new.

Any help/suggestions would be appreciated.

Thanks-

Kerry






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.