The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to Remove an Alam Sys 900

posted by  someone claiming to be draemweaver on  Wed Sep 25 09:05 CST 2002 [RELATED]

Did it last week had a Clifford alarm was not a problem! Disconnect battery first thing wait 15 min for airbag system to disarm and start cutting.Follow wires from siren this will lead you to alarm system mine was under knee bolster drivers side.From there take out any wires and resplice if needed lazy installers tend to use 3m blue crimps to splice into existing wiring just unlock tab and open pull wires straight up from connector if original wire does not look like to many strands were broken just tape wire to prevent any shorting out to frame if wire is damaged cut and use a good butt splice. Just a note if you don't allready know alarm will go off if trunk or hood is open or pin switches on them are damaged.Go ahead and do it the piece of mind is well worth it just don't go hanging on wiring when you are seperating good from bad. Steve






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.