The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1985 245 GLTi Wont Start and I'm almost at my wits end. 200

I think Jessie is spot on about an unmetered air leak check inlet hose to turbo and outlet hoses also. My B21FT will stall if I even loosen a hose clamp.
Also check where connections to hard intake pipe are made. After I repalaced my turbo and harness I had a no start until I either wrapped the hard metal hose w/ duct tape or had an air tight connection w/ the pcv hose.

One more thing short of taking injectors out, pull the mixture plug on the fuel distributor and take something small like and ice pick and gently push down on the mixture screw--this might get something unstuck. You might also, if you have the long 3 mm mixture tool richen the mixture 1/8 of a turn clockwise.


Just a few thoughts.
DHall






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.