The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

IAC Removal 200

posted by  someone claiming to be dlot on  Tue Oct 15 13:01 CST 2002 [RELATED]

If this is an 83 LH injected B23 the idle air motor is down below mounted on a bracket. The answer is no, you don't remove the intake manifold. You may have to move a hose or two out of the way but you basically just reach under there and unbolt the motors bracket from the support on the motor. You have to remove the electrical plug and the two air hoses, then you want to unbolt them motor with it's mounting bracket. You would swap the bracket to the new motor if you are replacing it. Make sure to use injection air intake cleaner it's a bit less caustic than regular carb cleaner. Supposedly it's safer on plastic stuff. The
spray can of Solder Seal/Gunk brand actually has a 940 motor on the front of the can! It's great, you go to the store and buy the can with the Volvo motor on it!

Dave 82 242ti 276k mi.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.