The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Of Course it hot... 700

To add to John's explanation, the expansion tank is there to act as a surge volume, and it only has the small hose going out from the bottom. The loop flow of coolant doesn't pass through the tank. There are only three ways to transfer heat: radiation, convection, and conduction. This setup primarily allows for convection through the coolant, and it can't pass much heat through what is basically a tube of static water 3/8" thick or so.

Add to that the heat loss to ambient air from the tank (again mostly convection from moving air against the tank wall) and you'll find it's hard for the engine to transfer its heat to the exp tank.

That's why the coolant in the radiator will burn your fingers and the coolant in the exp tank won't.

someguyfromMaryland






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.