The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

bushings bushings 200 1983

posted by  someone claiming to be miracleman49 on  Tue Oct 22 02:58 CST 2002 [RELATED]

agree with bob's post..i replaced almost all the bushings on my 91 240 with 260k miles about one year ago. The only bushing i did not replace is the rearmost bushing on the rear control arm...it is attached to the axle and requires a special tool.

I have access to a lift and a press, so I did not require any outside assistance. having a lift and some jiggle jacks makes the job a WHOLE lot easier because there are times when you have to support the axle etc..

Would highly recommend the urethane bushings, AT LEAST for the sway bar link pins!!!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.