The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Seal

There is, I think, good info on seals in the FAQ. Take a small and the large seal to a hardware store and get PVC fittings to use when driving them in. I don't remember what size, but there will be ones that will work.

Removing the old seals is not difficult. A small flat tip screwdriver will work. What won't work is applying so much pressure that the screwdriver slips and scratches the bearing area on the shaft. That will leak for sure. A scratch can be removed by sanding down with 400 grit wet-or-dry emery paper, and working on it for two or three hours. "Nuf said?" DAMHIK

Oil up the seals thoroughly before installing, and be sure the lip is properly on the shaft before driving it in. That's why the extra small seal. If you mess one up, you can still finish the job. The cam and I-shaft seals are the same. Do the crank seal last, when you kow how its done.

A shop manual is almost essential. Do you have one?

Good Luck,

Bob

:>)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.