The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Flame Trap Specifics

Matt...

It's VERY common for the brass nipple in the manifold AND the small vac line to plug solid with carbonized varnish.

If you unplug the small vac line at the flame trap, you should feel vacuum at idle. If not, check the hose and the nipple for blockage.

Yes, when you had the manifold off you should have replaced or cleaned the oil separator. With the manifold on, it's about as tough to access as the blower motor.

However, the oil separator doesn't plug as easily or often as the flame arrester or the small nipple. You can assess the oil separator by simply pulling off the top hose and allowing the engine to idle. Every engine has some blow-by, so you should see vapors puffing up from the crankcase. If no vapors, then the separator's likely to be plugged.

--
Don Foster (near Cape Cod, MA)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.