The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Yes, but...

only with lete model fuel injected cars with sophisticated computer systems (Motronic systems newer then 1.1). Carburated cars and early fuel injected cars needed higher cold idle speeds to mask less than perfect fuel mixture metering and fuel vaporization in cold manifolds and engines.

All electronically fuel injected cars that use an idle speed valve (pulsed or continuous injection) are temperature vs. idle RPM mapped, regardless if they incorporate elevated cold idle or not.

The better the correlation between engine fuel requirements and the ability of the computer to match these requirements, the less the need for the higher idle speed to compensate for a mismatch.

I know the Motronic 4.4 on my '96 960 springs to life with a momentary RPM of 1100, then immediately settles to a flawlessly smooth 750rpm or so whether stone cold or hot.

Bob






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.