The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Flame Trap Removal

Do a search, there is some good info on past messages. I found that I just couldn't get to it, so I pulled the intake manifold to get to it. Not a total waste of time, as you can also:

- clean throttle body
-clean intake manifold (will probably be full of hard to get rid of carbon gunk)
- put new seals on the injectors
- check condition of vacuum hoses
- If your flame trap is completely clogged, you might find the the "breather box" right below it is also clogged
-check condition of wiring harness, and clean connections to ther various sensors

If you choose this route, make sure you label all hoses and wire connectors that you remove. You might also have a hard time removing bolt number 6 on the intake manifold. An easy way to get to it is to pull injector #4 (counting from front of car to back)
Also order a new intake manifold gasket, new injector seals, and a new throttle body gasket before you start.

-have fun






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.