The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Wiring Harness 1989 Volvo 240 DL

Perhaps I'm missing the point but I assume that the old wires "plugged in" to the old unit. That would be your harness- it should have just unplugged from the back of the original radio. Some suppliers (Crutchfield comes to mind) sell an adapter with the radios you purchase from them that simply plugs into the original plug that used to plug into the old radio- they also give you instructions. If you don't have something like this you will need to identify all the wires that used to run to your radio.

I wasn't aware that the 1989 240's had a factory amp. Neither of mine had factory amps. If yours does then I think you should simply eliminate it as is the procedure for installing aftermarket units in the later 740's equipped with factory amps. Sorry I can't be more help.

Randy






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.