The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 ECU problems

The O2 Sensor signal wire (maybe there's only one wire on yours) should have somewhere close to .5 V on it when you first start the car... after warmup for a couple of minutes (try to rev engine to 2500 rpms or so for 2 min. to make sure sensor gets warm) the sensor should fluctuate between .1V and .9V. The .1V signal indicates lean, the .9V signal indicates your car is running rich telling the computer to send less gas.

If it stays at .9V the O2 sensor could be bad... there's testing procedures on the board somewhere... do a search for oxygen sensor...

I found an ECU for my '86 in the junk yard for $30 (including the core charge) now I have it as a spare to eliminate the computer as a source of problem when troubleshooting.

test the O2 sensor before trying to rig something up, I think sensors for the early 80's vehicles are pretty reasonable.

jack
--
Bad Blue, '86 245, 244,000 mi.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.