The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

740 turbo oil trap questions 700

yeh...but blow real softly 100psi would NOT be clever!

better still just pull the PCV system and clean/replace its nto a bad job and gives piece of mind...

that big pipe (i know exactly the one you mean caused me real greif...i replaced the breather box, cleaned everything, replace seal on oil filler and still had oil blowing out the filer seal...

that big hose was I THOUGHT clear (i could run water thru it..) but i got it off again and REALLY thoroughly cleaned it (i.e. clamped to a stick in a U then filled with GUNK and rodded it with a piece of plastic covered wire - so as not to damage it) and repeated...got an amazing amount of hardened coke out of it and about DOUBLED the effective internal diameter...propblems disapeared...

Now..on mine it goes from the AMM hose to the top of the flame trap and is about 30 secs to remove ...so I would take it off and really check it...






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.