The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Stupid question, but... Intake Manifold removal

Ringlee's advice is great. The only thing is, you can leave the fuel rail alone. Just move the manifold far enough back so you can get in there. The manifold takes about 10min to remove once you've done it a few times. Leave the throttle body on as well. Just pull off the little PCV hose from the flame trap housing, and perhaps the ones at the throttle body (depending on how far they'll flex).

Also, good time to check the oil trap and flame trap if you're so inclined... heater hoses are easy too. This sounds like a huge job but in reality it is nothing at all.

Careful of the throttle cable and transmission shift control cable from the throttle spool. You don't want to break them. Basically if you use care you'll come out fine.
--
Chris Herbst, in Wisconsin.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.