The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

lost heater shutters 200 1984

If you've lost all of these, then your vacuum reservoir is not getting vacuum. There's a small (1/4 in dia.) line going to the firewall behind the right side of the engine back near the O2 sensor. Goes into a black rectangular plastic fitting. If that line is off, reconnect it to the manifold. If it's still connected, you'll have to pull the sides off the console and contort yourself to look up forward by the firewall. There's a white plastic thign on the top center of the tunnel that looks like a bunch of white balls stuck together. The vacuum to your pushbuttons comes from that, and that's where the incoming hose goes too. It's tough to see and getat but that is your starting point after making sure it's all hooked up under the hood.
Good luck!~
--
Rob Bareiss, New London CT ::: 86 244DL, 87 244DL, 88 744GLE, 91 244: 808K total






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.