The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

will any 200 engine drop into another? 200

Short answer: yes. The mount points are the same.

Long answer: Chances are, with all the different systems installed over time, you may also need to transfer wiring, ignition and injection computers, sensors, etc.

You have 2 basic options: one is transferring the "guts" (ie. the longblock) and keeping all the ancilaries from the old one. The old one probably has K-jet, the later ones have LH-jet which lacks the injector holes in the head, so that would be a bit of a problem.

The alternative is to grab everything from the donor: block, wiring, sensors, manifolds, air filter housing, ducting, the lot, and basically upgrade the oily bits to full later model spec. More work, but you will on the other hand end up with newer stuff and in my opinion a more reliable system.

Bram






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.