The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Mighty Morphin Midas Muffler Mount

Without actually seeing it, hard to offer advice, only guesses. I have replaced the rings myself before. Been awhile. I don't know if maybe you gotta loosen and twist the muffler a bit so the bracket is in a slightly higher position. It has really been a few years since I did it. Seems I had to use a floor jack under the muffler to sort of 'force' it to go a little higher so I could get the darn thing hooked. (Hmmm. Let me think some more.) (If you do that, by the way, careful you don't mess up the muffler with the jack.) Was the old ring 'super-stretched' out? I sort of recall that I had to remove some of the other rings so I could "tilt" the pipe so I could hook over that one ring, then put the pipe back on the rings I removed. Might want to replace the other rings also at that time, if need be. Also might just going to take some more stretching and cussing! Good luck.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.