The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

replace floor dimmer switch 444-544

I've done that on my PV (after the floor switch exploded in sparks and smoke, leaving me suddenly in the dark on a curvy country highway *shudder*) and it works perfectly. The wiring loom that reaches down to the switch also easily reaches into the engine compartment where I put the relay. The tuen signal pull-back switch is hooked to a gray wire that protrudes from the wiring loom on the left side about midway along the engine compartment - just forward of the heater assembly. Its a short unstripped stub of gray wire.

Get a 140 or 240 wiring diagram and study the wiring to the dimmer a bit - there's not a lot of wiring to do. I spent about 10 minutes staring at the wiring diagram (the relay terminals are all shown on the diagram), then about 25 minutes hooking wiring terminals on wires and plugging it all together.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.