The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

URGENT - BOLT SIZE for Rear Upper Spring Mount??????? 200 1987

I need to know the lenght and width at threads of the bolt holding the rear upper spring mount (See part #9 in picture.) Will work the weekend with an idea to lift the car rear. Will post solution if it works. :)

I need this info in order to buy longer bolts than stock.

Thanks.
As this is a metric bolt please state size in mm or cm.
---------------------------------------
The idea follows.

1. Make a 1/2 steel spacer 4" diameter with a 1/2" hole in the center.
2. Put that spacer over the Rear Upper Spring Mount.
3. You will need a longer bolt to tighten the mount.

A friend told me it works... it will lift the rear one inch. (go figure the mathematics). You get to keep the stock springs.

I will tell you later if it does...
--
1987 - 240 DL 76k mi







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.