The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Found my exhaust system noise. 700 1988

A couple of days ago I posted that I had "fixed" my exhaust system rattle by repairing the loose cat shield. Well, it's still there for a minute after cold startup. This morning while it was clanging away I reached under the car and grabbed the (still cold) cat and the noise stopped. The pipe was loose and pivoted easily up toward the turbo.

Sure enough, the downpipe is loose at the turbo and can be rotated. I'm guessing this isn't normal. I found the nut on the lower of the three studs to be loose and tightened it up. The other two nuts didn't turn but then, they're pretty corroded. I sprayed them with PBlaster and will check tomorrow.

Do these come loose over time? Is there a gasket between the turbo and downpipe?

Thanks,
--
Erwin in Memphis, '95 855t






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.