The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Installing Jumbo Brakes on a non-ABS car

Jumbo brakes only came on ABS cars to the best of my knowledge, so they are all single piston.

The calipers, , caliper holding brackets, and pads for the Big brakes (11.25" diameter) are different from the Jumbo brakes.

To upgrade an ABS car (with big brakes) to Jumbo brakes you need calipers, caliper holding brackets, pads, and rotors. As per abe's instructions.

To upgrade a non-ABS car to Jumbo brakes, you need the same parts and two brake master cylinder plugs. You will be removing two brake lines and hoses.

Jumbo Girling brakes use the 1198 brake pad. The Girling brakes for both 11.25" (we call them the Big brakes) and 10.25 inch rotors take the 508 pad. ABS makes no diifference on the pad use for Girling 11.25" and 10.25" rotors.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.