The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A/C Switch 200 1987

I have an 87 245 gl with the old style rotary a/c switch. There are four connection points on the back and four connectors. A double green, and a green control the compressor clutch and a red, and a blue-yellow control the idle increase. My switch broke, so I cut the capillary tube and put the idle control and the compressor clutch control into two separate standard switches. That worked fine but then i wanted to have just the rotary switch, so I bought a new rotary switch and hooked it up but it doesn't work. I hooked up the four wires in all the combiantions i could think of but couldn't get it to work. First, what are the correct connections? (two on the back of the switch, top and bottom, and two on the side of the switch, top and bottom) Also does the switch work without the capillary tube connected? What is the tubes funtction? Can I just crimp off the tube and go to a new style rocker switch?
Thanks, Nick






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.