The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Peter Penguin, about the breather box...'95 944Ti 900

Thanks for that bit of information, below, responding to TADD's question. So I have to remove the EGR valve before removing the "giant" breather box. That is exactly what I didn't want to hear but I'm glad I know now. I was hoping that I could wiggle a long extension wrench from on top of the manifold, remove the B'box bolts and lift it up and out. I didn't get that far yet. I already sprayed the EGR tubing nuts with PB in case that was the route I had to take.

Any problem taking off the EGR valve besides the lack of space? Tubing bolts tight? Any thing to check for in the valve itself, once it's off? I don't think I'll have a problem with the breather box once the EGR V is out of the way. What was the condition of the old B' box interior?

I have been trying to get this done outside but the weather is not cooperating. I'll have to reattach everything and move it into the garage this weekend.
--
Tom F






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.