The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

OD on '93 945T won't engage

I drove from Iowa to Florida, stayed there a week, then when I was ready to drive back, the OD wouldn't engage during normal operation. The only way I could get the OD to engage was to accelerate normally to 55mph, then accelerate rapidly (push the pedal down quickly about 1.5 inches)to 60mph, then let up on the accelerator and it would shift. After doing this, I could cruise normally at interstate speeds. If I dropped below 45mph, I had to go through this process again to get the OD to engage. I've re-soldered the OD relay (re-soldered the fuel pump relay at the same time), and tried adjusting the downshift cable. Neither procedure solved the problem. Does anyone have any suggestions to solving this?
Marlin Mangels






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.