The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Relay for Headlight Signalling 120-130

Yep that's pretty much what I meant about "finding" the trigger- the grey lead would go there once everything's figured out.

I guess the next step would be to confirm the black and red leads when touched together cause the high beams to illuminate. Just try touching them together and see if that works. If so, then you know you've got all the right wires, and they're all performing as we expect them to.

The dome light circuit may also power the 12 volt trigger that is supplied by the turn signal stalk when you engage the high beam signal function.

I would start here by hooking the grey trigger lead to the relay where we think it goes, then pull on the stalk and make sure the relay makes a click. If not, then either the relay's faulty or it's the wrong type.

Hope that helps.
Dylan






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.