The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

cam gear set 140-160

The steel gears have a different pitch to the fibre ones (steel have more teeth than fibre), so you'll have to replace both of 'em.
The supercharger will probably be from a low-mileage Toyota 4AGZE engine. They can flow a lot of air, and are nicely made. And cheap. Around the $400 mark complete. Intercooler is from a diesel Range Rover.
Brookfield only modified the combustion chambers to un-shroud the valves and smooth out the flow path a bit. He cleaned up the ports but didn't enlarge them. Otherwise it is unchanged. It seemed to work pretty well on the B20B it was fitted to. Damned thing revved like a bike engine :) Drop by with 20 bux in hand and its yours.
(BTW, John Brookfield was one of the blokes responsible for the development of Jack Brabham's Repco BT?? F1 engine way back. He lives down here now)

Steve






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.