The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing carpet 700

I would cut the carpet with scissors so only abut 1/2 to 1" needs to be tucked up under the side panel with a screwdriver. Thats the easy way. The other way is to open the center console , pry up the cover in the bottom, unscrew the two phillips screws. Also unscrew the two phillips screws in the cubby box right under the handbrake handle, take out the ashtray, and the fusebox cover , remove the clip in the center under the fusebox cover, lift up the plastic cover for the shift indicator and handbrake. Now you can slide the centerconsole back and reveal the two screws on the side holding the side cover. There is also a screw on the side further forward. Now you can pull the sidepanel out and tuck the carpet up under it. Slit the carpet as necessary to get it in properly around the screw brackets. If you want to remove the panel completely ask for further instructions. I have done it many times.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.