The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Overdrive issues: Update

Thanks for all the help!

"If you do not want to take it off, get a long piece of wire and connect one end to the positive battery terminal. Crawl under the drivers side and remove the yellow wire from the solenoid. Leave the ground attached. Touch the test wire to the terminal. The solenoid should click, very sharp and crisp. Removing power should also yield a click as the slug is pushed back. It will not be very loud as the spring is not all that strong but it should be crisp. "

Both the solenoids I have on my driving car and parts car were almost inaudible.

The tool I got for removing the OD solenoid just strips it though.
what do u use to remove?
I was thinking a 1" crows foot with a breaker bar/ratchet after some PB treatment, that should do it.

made a portable tester before to take to a junkyard?

thanks
take care

Luke






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.