The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

to any and all wagonners 120-130 1968

I'm putting my wagon back together, specifically the rearmost bit of bodywork, the bit that sits below the rear door, just forward of the bumper. Anyway the car came with some damage in this area (middle section of bumper and bodywork were stove in), now as I do reaasembly I need to know if the L&R edges of the piece in question are supposed to be flush with bodywork that lies just below the rear reflectors. Also re this piece, is it in a flush (but curved) line with the rear door, or does it sit forward or aft of the line? The piece was not that damaged, but upon reaasembly it seems to want to sit about 3/16" forwrad of the edging body work and a good 1/4" of the rear door.
Any info appreciated as well as a couple of high res shots if anyone has any.
Thanks as always, P of M.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.