The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

IPD Transmission Flush Hose 900 1992

I just did this last weekend with nothing more than a piece of 1/2 inch ID rubber hose and a single hose clamp. Remove the top trans cooler line at the radiator, run the hose over to your dump bucket, run the car and feed it more fluid as it comes out. Top off when you've flushed enough. What's enough? I put 6 quarts through it- my fluid was pretty dirty. Your call.

Note: on my 240, there was a perfect spot to hold the 1-qt empty bottles of ATF, along the frame rail right next to the cooler lines and exhaust manifold. The bottles stood upright, and since they had the clear line up the side, I could see when they were full. It only took 15 seconds or so to remove 1 qt.
Then I poured in the new quart, and used that bottle for the waste. Worked great and in 1/2 hour or so I was all done and cleaned up.

Good luck!
--
Rob Bareiss, New London CT ::: "Roterande Fläkt Och Drivremmar!"






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.