The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

remote locking/unlocking 700

Just done my 740 but with a non-Volvo lock motor.
Your sytsem`s existing door switch is a negative pulse system.
It grounds one wire with the key turned clockwise and the other on turning it the other way. This triggers the existing c/locking relay to send a pulse down the two lock motor wires which go to all the lock motors to lock the doors.
When the opposite ground is made by the door switch the relay sends another pulse with reverse polarity to the motors to unlock.
I too suggest that you keep the existing relay and use the new system to trigger that.
Your "new" motor wires then just splice into the wires going to any of the existing motors,and those from the remote to the switch wires.
If you can`t figure it out, e-mail me a copy of your remote kit`s instructions
and I`ll try to sort it out.
Colin.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.