The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

engine mounts 700 1987

The main bolt on the top of the mount is 17mm. The 3 other smaller bolts are 13mm. The mount on the Turbo side has 2 13mm bolts on the front of the base of the mount and a third that comes up from the underside of the frame on the rear. I found these, along with the 1 17mm bolt on the top were easiest to get to from the bottom of the car. For the drivers side, 2 bolts I could get to using a very long ratchet extension with a flex joint. The third I got to from the bottom. The top bolt was also accessible from the top of the car.

Overall, make sure you remove all turbo hoses and tubes - this makes things much easier. Basically - remove most simple things that could get in the way.

It was an easy job - just don't get too frustrated when some of the bolts prove awkward to remove. I would say the whole thing took me 2.5 hours working at a steady pace.

88 745T 175k mi
Stephen






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.