The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Coincidence or Not??? - High idle problem 200 1990


Something weird happened yesterday. Hopefully somebody can help me out.

I was attempting to track the down the source of my oil leak - probably the breather box but that's a story for another day...Anyway, I switched the gasket around and tightened the "teeth" on my oil cap. I removed the large hose from the flame trap to the throttle body area and also a hose (don't know what it's called) on the opposite side of the throttle body to check for oil contamination as suggested here. Also cleaned up leaks at the cap and in the rear main area so I can trace the source. Bear in mind that I have already cleaned or replaced the valve cover gasket, flame trap, ft hoses and intake nipple.

Then I began to run out of daylight and put everything back to together. Fired her up and she's idling at 2000 RPM's or more. Wouldn't kick down. I had to manually adjust the idle down. Still idled high this morning.

My question is assuming the cap seal was bad, did I restore proper vacuum to the system by switching it and tightening the "teeth"? Maybe the computer just needs time to adjust the idle - she did run smooth and strong on a test drive afterwards!!

OR - Is there a coincidental problem with the throttle position switch or plate? Plate out of adjustment or a bad switch?

Or perhaps the gas cable is hanging up?? I lubed the throttle linkage/cables but didn't have time to investigate the gas pedal area.


Appreciate any thoughts/assistance!


Jim 90 244DL






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.