The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Foglight mounting bracket broken off 700 1989

Well, there is a cheaper and easy fix-it solution. If you go to your local hardware store and find some galvanized steel stock (approx 1/8" thick... 1" wide any length you need with 3/8" holes placed every inch or so.) Also buy 3 sets of bolts w/ lock washers and nuts... if you ask your local hardware store ppl they can help you. (I work at ACE in Wisconsin.) Then cut the stock with a hack saw about 6" - two pieces... however length to get the lights to sit in the same pos as before. Then pos the two pieces of stock in a "V" so that the top of the "v" is at the bolt locations of the orig. harness. Then position the two pieces over each other so that the last two holes meet up creating the V... bolt the foglight to this end... tada.. you may need some washers and longer bolts to get the foglight positioned vertically correctly... but I did this to both of my fogs 2 yrs. ago and they're still holding strong... no rust either!

Joe






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.