The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

remote locking part 2 700

Ov,
There should be a clip on the end of that slips over the linkage. If I remember correctly it should be about an inch and a half long, made of spring steel, flat on one end with a hole and the other end has a springy clip that clips on the door lock rod (the one with the 90 degree bend at the end). You slip the linkage hole over the door rod, slip the clip hole over the door rod then turn it and press til the clip snaps on the rod above the connection. It is tight in there, but you should be able to see with a flashlight (mini-mag (or equivalent) between the teeth takes care of the third arm deficiency we humans seem to have). The door fram has holes cut in it to see and work. I also had to use screwdrivers to hold the clip on til I could squeeze my hand up there. A good pair of really long needle-nose pliers or a surgical clamp would work too.

It takes a few tries to get but it is not impossible.


Good luck.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.