The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

heater valve for non-aircon car replacement 700

Yep, you got it. It doesn't appear as difficult as it looks. Here's what the manual says:

-disconnect battery ground and remove left side dash under panel and air hose
-clamp off lower hose from valve to heater core
-clamp off lower hose in engine compartment then disconnect
-place cloth on carpet to soak up spilled coolant
-remove lower hose inside car connected to valve
-remove control housing from water valve
-remove plastic valve by rotating clockwise. Unhook cable

to install:
-reconnect cable to water valve
-install valve by placing it on the mount and turning counterclockwise
-mount and adjust the control housing
-reconnect hoses under dash and in engine compartment
-remove hose clamps

If you are a midget with tiny hands, it should be a piece of cake.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.