The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

flywheel position 700

posted by  Aye Roll on  Sat Apr 19 03:39 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 14 21:08 CST 2014
[RELATED]

The text from Swedishbricks is:
"Turn the engine to #1 TDC (timing marks in line on crank pulley to pointer on timing belt cover), then install the flywheel so that the two rivet-like pins that are on flywheel inboard of ring gear about 1+ inch are on the exhaust side of block roughly at 2 o'clock and 3:30 while the engine is at TDC. You might find that at this position you will see a faintly stamped arrow pointing at the crank sensor. Not all flywheels had this arrow for the first couple of years, so you might not find it on yours. One bolt hole in either direction puts them way out of this orientation. The spot on edge of flywheel where the holed surface is interrupted will be mostly lined up with starter when it is correct. "

I think you have to assume that you're looking at the flywheel end of the engine here, ie looking forward. That way the exhaust side would be on the right, and "2:00 and 3:30" would be roughly over by the exhaust manifold.
--
Rob Bareiss, New London CT ::: '86 244DL- 215K, 87 244DL- 230K, 88 744GLE- 198K, 91 244 180K






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.