The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

PCV and oil leak problems 200 1984

I'm getting some oil leaking around my oil filler
cap and the rear of the valve cover gasket
near the firewall. I suspect it's the pcv hose
or the oil seperator it's connected to.

Is it hard to remove the oil seperator? Could anyone
give me pointers on how to best do this. I was also
wondering about how to check and clean this part.

For awhie I had a bad oil filler gasket. It had hardened
over the years. In addition there was minor leakage
around the valve cover but very little, it mostly
came out of the cap. However now with a new filler cap
gasket on, I suspect the pressure is forcing oil out
the weak spots in the valve cover gasket. Is this
correct? Am I correct to assume it might be a clogged
pcv hose or oil seperator?

Thanks
Drew
1984 242Ti glt






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.