The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

brake system leak - it's baaaack..... 200 1988

posted by  david hunter on  Mon May 5 06:12 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jun 30 22:10 CST 2014
[RELATED]

I had the same problem and replaced the entire unit, replacing the switch will not cure the leaking. The leak originates inside due to worn piston seals. The switch body is not intended to seal against and withstand the internal pressure. The job is a bit awkward getting in there to disconnect all the lines, did it from underneath. I disconnected or loosened the all the lines I could then removed the single mounting screw for the rest. Fill the reservoir with fluid then seal the small hole in the reservoir plastic cap with a piece of tape to minimize dripping while you work. Of course bleed when done.


--
David Hunter






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.