The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Intermitent stalling and NO start - Ignition switch??? 200 1987

I've been working the past week trying to identify the problem for a intermitent stalling in my brick.

1. Coil was tested
2. ICU conector was checked. Apparently the PO had the connector fixed since it had the sleeves. Connector was cleaned and dielectric grease put in,
3. Cap, rotor, cables, plug all have less than 6 months.
4. Grounds, fuses all OK

Finally it seems that the problem is the ignition switch, if I play with it after a stall it will turn on (Power windows won't work when stalled, to save battery power I play with the switch while trying to operate the windows, when the windows work the car will start).

I see more information on the FWD and 700 forums on this matter, but not much on the 200. Is this a problem also with the 240.

Should I change the whole switch or just the electric portion?

Thanks for the help
--
1987 - 240 DL 76k mi






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.