The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

fuel injection 1800 1973

posted by  Viper1800e on  Tue May 13 01:05 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi,

26,27,28,29 should go to ground lug on the intake manifold. Wire #3 should go to the ECU for #1 cyl.. You have to set your meter to low range as the injector windings are 3-4 ohms and reading through them will look like a short to ground. . On the the higher range everything looks like a short. Check that the 26 wire is not broken at the gound point on the manifold. You should see a group of white wires there into one common round terminal lug. See this link for an overall view and schematic.

http://www.icbm.org/erkson/ttt/engine/fuel_injection/d-jet.html

Greg B.
1970 1800E





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.