The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B20E head 460906 1800

posted by  walrus3 on  Fri May 16 02:12 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

An E head should be 85.5 mm thick while an F head should be 87 mm.

In D-jet heads you have a port for coolant temp sensor, which is small,
fine thread, and one for the thermal timer which is 1/4" pipe (almost 1/2",
coarse thread) as well as about a 3/4" hole for an auxiliary air valve,
with 2 1/4"-20 UNC bolt holes to hold it in. Which of these holes does your
head not have?

I've not studied the 74 and 75 B20 heads closely, but some of these holes
are not used on the CIS injection system.
--
George Downs, The "original" Walrus3, Bartlesville, Oklahoma






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.